Polycom DOC2702A, RMX 1500 manual Identification as identified by the MCU

Appendix C-CDR Fields - Unformatted File

Table C-14Event Fields for Events 10, 101, 105 - DEFINED PARTICIPANT, USER ADD PARTICIPANT, USER UPDATE PARTICIPANT (Continued)

Field	Description
Dialing Direction	The dialing direction, as follows:
	0	- Dial-out
	5	- Dial-in
Bonding Mode	Not supported.
	Always contains the value 0.
Number Of	Note: This field is only relevant to ISDN/PSTN participants.
Channels	The number of channels being connected for this participant.
Net Channel Width	Not supported.
	Always contains the value 0.
Network Service	The name of the Network Service.
Name	An empty field “” indicates the default Network Service.
Restrict	Not supported.
	Always contains the value 0.
Audio Only	Indicates the participant’s Audio Only setting, as follows:
	0	- The participant is not an Audio Only participant
	1	- The participant is an Audio Only participant
	255 - Unknown
Default Number	Note: This field is only relevant to ISDN/PSTN participants.
Type	The type of telephone number, as follows:
	0	- Unknown
	1	- International
	2	- National
	3	- Network specific
	4	- Subscriber
	6	- Abbreviated
	255 - Taken from Network Service, default
	Note: For dial-in participants, the only possible value is:
	255 - Taken from Network Service
Net Sub-Service	Not supported.
Name	This field remains empty.
Number of	Note: This field is only relevant to ISDN/PSTN participants.
Participant Phone	The number of participant phone numbers.
Numbers
	In a dial-in connection, the participant phone number is the CLI (Calling Line
	Identification) as identified by the MCU.
	In a dial-out connection, participant phone numbers are the phone numbers
	dialed by the MCU for each participant channel.

Polycom, Inc. C-21