Motorola MCF5282, MCF5281 user manual Receive Buffer Descriptor Field Definitions, RO1, Erdsr

Buffer Descriptors

Table 17-36. Receive Buffer Descriptor Field Definitions

Word	Location	Field Name	Description
Offset + 0	Bit 15	E	Empty. Written by the FEC (=0) and user (=1).
			0 The data buffer associated with this BD has been filled with
			received data, or data reception has been aborted due to an
			error condition. The status and length fields have been
			updated as required.
			1 The data buffer associated with this BD is empty, or
			reception is currently in progress.
Offset + 0	Bit 14	RO1	Receive software ownership.
			This field is reserved for use by software. This read/write bit will
			not be modified by hardware, nor will its value affect hardware.
Offset + 0	Bit 13	W	Wrap. Written by user.
			0 The next buffer descriptor is found in the consecutive
			location
			1 The next buffer descriptor is found at the location defined in
			ERDSR.
Offset + 0	Bit 12	RO2	Receive software ownership.
			This field is reserved for use by software. This read/write bit will
			not be modified by hardware, nor will its value affect hardware.
Offset + 0	Bit 11	L	Last in frame. Written by the FEC.
			0 The buffer is not the last in a frame.
			1 The buffer is the last in a frame.
Offset + 0	Bits 10–9	—	Reserved.
Offset + 0	Bit 8	M	Miss. Written by the FEC. This bit is set by the FEC for frames
			that were accepted in promiscuous mode, but were flagged as
			a “miss” by the internal address recognition. Thus, while in
			promiscuous mode, the user can use the M-bit to quickly
			determine whether the frame was destined to this station. This
			bit is valid only if the L-bit is set and the PROM bit is set.
			0 The frame was received because of an address recognition
			hit.
			1 The frame was received because of promiscuous mode.
Offset + 0	Bit 7	BC	Will be set if the DA is broadcast (FF-FF-FF-FF-FF-FF).
Offset + 0	Bit 6	MC	Will be set if the DA is multicast and not BC.
Offset + 0	Bit 5	LG	Rx frame length violation. Written by the FEC. A frame length
			greater than RCR[MAX_FL] was recognized. This bit is valid
			only if the L-bit is set. The receive data is not altered in any way
			unless the length exceeds 2047 bytes.
Offset + 0	Bit 4	NO	Receive non-octet aligned frame. Written by the FEC. A frame
			that contained a number of bits not divisible by 8 was received,
			and the CRC check that occurred at the preceding byte
			boundary generated an error. This bit is valid only if the L-bit is
			set. If this bit is set the CR bit will not be set.
Offset + 0	Bit 3	—	Reserved.
Offset + 0	Bit 2	CR	Receive CRC error. Written by the FEC. This frame contains a
			CRC error and is an integral number of octets in length. This bit
			is valid only if the L-bit is set.

17-48 MCF5282 User’s Manual MOTOROLA