20. Graphics Data Translation Accelerator (GDTA)
Rev.1.00 Jan. 10, 2008 Page 998 of 1658
REJ09B0261-0100
20.3.19 CL Output Padding Size Setting Register (CLOPR) CLOPR is in the CL register block and sets the output padding size in byte units.
161718192021222324252627282931 30
0000000000000000
⎯⎯
⎯⎯
BIt:
Initial value:
R/W:
01234567891011121315 14
0000000000000000
CL_OP
⎯⎯
R/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/W⎯⎯
BIt:
Initial value:
R/W:
Bit Bit Name
Initial
Value R/W Description
31 to 12 All 0 Reserved
These bits are always read as 0. The write value should
always be 0.
11 to 0 CL_OP All 0 R/W Output padding size setting
Should be set in byte units.
Value set should be 2 × n (n: an integer greater than 0)