27. NAND Flash Memory Controller (FLCTL)
Rev.1.00 Jan. 10, 2008 Page 1346 of 1658
REJ09B0261-0100
27.3.2 Command Control Register (FLCMDCR) FLCMDCR is a 32-bit readable/writable register that issues a command in command access mode, specifies address issue, and specifies destination of data to be input or output. In sector access mode, FLCMDCR specifies the number of sector transfers.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
1514131211109876543210
0000000000000000
R/W R/W R/W R/W R/W R/W R/W R/W R R R/W R/W R/W R/W R/W R/W
0000000000000000
R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit:
Initial value:
R/W:
Bit:
Initial value:
R/W:
ADRMDSCTCNT[19:16]
ADR
CNT2 CDSRC DOSR SELRW DOADR ADRCNT[1:0]
DOCMD2 DOCMD1
SCTCNT[15:0]
Bit Bit Name
Initial
Value R/W Description
31 ADRCNT2 0 R/W Address Issue Byte Number Specification
Specifies the number of bytes issued in the address
stage.
0: Issues address as many as the bytes specified in
ADRCNT1 and ADRCNT0
1: Issues 5-byte address
Note: Set ADRCNT1 and ADRCNT0 to 0.
30 to 27 SCTCNT
[19:16]
All 0 R/W Selector Transfer Count Specification [19:16]
These bits are extended bits of bits SCTCNT[15:0].
When bits SCTCNT[19:16] and bits SCTCNT[15:0] are
put together, these bits operate as a 20-bit counter of
bits SCTCNT[19:0].
26 ADRMD 0 R/W Sector Access Address Specification
This bit is invalid in command access mode. This bit is
valid only in sector access mode.
0: The value of the address register is handled as a
physical sector number. Always use this value in
sector access.
1: The value of the address register is output as the
address of flash memory.
Note: Clear this bit to 0 in continuous sector access.