19. Display Unit (DU)
Rev.1.00 Jan. 10, 2008 Page 851 of 1658
REJ09B0261-0100
Bit Bit Name
Initial
Value R/W
Internal
Update Description
16 DFB1 0 R None Display Frame Buffer 1 Flag
0: The address indicated by the plane 1 display
area start address 0 register (P1DSA0R) in
plane 1 is being used as the display area start
address
1: The address indicated by the plane 1 display
area start address 0 register (P1DSA1R) in
plane 1 is being used as the display area start
address
15 TVR 0 R None TV Synchronization Error Flag
0: After using the DRES bit in DSYSR or the
TVCL bit in the display status register clear
register (DSRCR) to clear the TVR bit to 0,
indicates that the rising edge of EXVSYNC is
being detected each time within the vertical
period determined by the setting of the
vertical scan period register (VCR).
1: Indicates that the rising edge of EXVSYNC
was not detected within the vertical period
determined by the setting of VCR when in TV
sync mode.
The TVR bit holds its state until cleared to 0
by the DRES bit in DSYSR or by the TVCL bit
in DSRCR.
14 FRM 0 R None Frame Flag
0: After clearing to 0 the FRM bit using either the
DRES bit in DSYSR or the FRCL bit in
DSRCR, in interlaced mode indicates the
interval to the next display end, and in
interlaced sync mode or in interlaced sync &
video mode indicates the interval to the
display end of the next even field.
1: After clearing to 0 the FRM bit using either the
DRES bit in DSYSR or the FRCL bit in
DSRCR, indicates the interval until the next
time the FRM bit is cleared, from the first
vertical blanking interval in non-interlaced
mode, and from the first even field blanking
interval in interlaced sync or in interlaced sync
& video mode. (frame units)