Renesas SH7781 - page 1191

23. Serial Peripheral Interface (HSPI)
Rev.1.00 Jan. 10, 2008 Page 1161 of 1658
REJ09B0261-0100
23.3.3 System Control Register (SPSCR)
SPSCR is a 32-bit readable/writable register that enables or disables interrupts or FIFO mode,
selects either LSB first or MSB first in transmitting/receiving data, and master or slave mode.
If any of the FFEN, LMSB, CSA, or MASL bit values are changed, the module will undergo a
software reset.
161718192021222324252627282931 30
————————————————
RRRRRRRRRRRRRRRR
Bit:
Initial value:
R/W:
01234567891011121315 14
00000010000000
MASLTXDERXDEROIETFIE CSACSVLMSBFFENRFIERHIERNIETHIETEIE——
0000000000000000
00
R/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WR/WRR
Bit:
Initial value:
R/W:
Bit Bit Name
Initial
Value R/W Description
31 to 14 ⎯ All 0 R Reserved
These bits are always read as an undefined value. The
write value should always be 0.
13 TEIE 0 R/W Transmit FIFO Empty Interrupt Enable
0: Transmit FIFO empty interrupt disabled
1: Transmit FIFO empty interrupt enabled
12 THIE 0 R/W Transmit FIFO Halfway Interrupt Enable
0: Transmit FIFO halfway interrupt disabled
1: Transmit FIFO halfway interrupt enabled
11 RNIE 0 R/W Receive FIFO Not Empty Interrupt Enable
0: Receive FIFO not empty interrupt disabled
1: Receive FIFO not empty interrupt enabled
10 RHIE 0 R/W Receive FIFO Halfway Interrupt Enable
0: Receive FIFO halfway interrupt disabled
1: Receive FIFO halfway interrupt enabled
9 RFIE 0 R/W Receive FIFO Full Interrupt Enable
0: Receive FIFO full interrupt disabled
1: Receive FIFO full interrupt enabled