Lucent Technologies Release 8.2 manual Intuity System Administration, Definity ECS administration

Configuration 2: R7r (+CMS) <—ethernet—> R7csi			3 C-LAN Administration
	Field	Conditions/Comments
	Session - Local	The Local and Remote Session numbers can be any value
		between 1 and 256 (si model) or 384 (r model), but they must
	Session -
		be consistent between endpoints. For each connection, the
	Remote
		Local Session number on this switch must equal the Remote
		Session number on the remote switch and vice versa.
		It is allowed, and sometimes convenient, to use the same
		number for the Local and Remote Session numbers. It is
		allowed, but not recommended, to use the same Session
		numbers for two or more connections.
	Mach ID	Destination switch ID. This is the Local Node Number on the
		dial plan of the destination switch.
			3 of 3
	> Submit the screen
	End

Intuity System Administration

Procedure Overview The following is a checklist of procedures that must be completed to administer a DEFINITY ECS with a TCP/IP connection to a Lucent Intuity system. The DEFINITY administration procedures are described in DEFINITY ECS Administrator’s Guide , 555-233-502 and in previous sections of this chapter. The Intuity system administration procedures are describe following the checklist.

For a complete description of the administration procedures for connecting an Intuity system to a DEFINTIY ECS, see Intuity Messaging Solutions — Using a LAN to Integrate with DEFINTIY ECS, 585-313-602 for Intuity R4.4 or 585-313-604 for Intuity R5.

DEFINITY ECS administration

The following procedures must be done on the host switch:

•Administer the local node number in the dial plan.

•Administer the Intuity system voice ports as stations, including Class of Restriction (COR) and Class of Service (COS).

•If the switch is a csi model, assign the bus bridge.

•Assign node names for the Intuity system and the switch.

•Administer a hunt group, and add the Intuity system voice ports to that hunt group.

•Add an ethernet data module.

•Administer a processor channel for the link from the switch to the Intuity system.

•Enable the link on the ethernet data module.

•Set up a coverage path for access to the voice port hunt group.

		Administration for Network Connectivity
92	CID: 77730	555-233-504 — Issue 1 — April 2000