Lucent Technologies Release 8.2 manual Issue 1 April CID 111

Configuration 3: R8si<—x.25 —> R8r Gateway			3 C-LAN Administration
<—ethernet—> R8si
	Field	Conditions/Comments
	Interface Chan	For TCP/IP, interface channel numbers are in the range 5000
		– 64500.
		The recommended values are: 5001 for CMS, 5002 for Intuity
		AUDIX, and 5003 for DCS connections that are not
		gateways. These three values should be reused for multiple
		instances of these applications; for example, if there are two
		Intuity AUDIX’s, use 5002 for both; or if there are four
		DEFINITY ECS’s, use 5003 for all four. The combination of
		Link, Interface Channel, and Mach ID must be unique.
	Destination Node	Name of the far-end node for this channel. This must be a
		name entered on the Node Names screen.
	Destination Port	A value of 0 allows any available interface channel on the
		destination node to be used for this connection. The Interface
		Channel number on the Switch-3 Processor Channel screen
		must also be set to 0.
	Session - Local	For each connection, the Local Session number on this switch
		must equal the Remote Session number on the remote switch
	Session - Remote
		and vice versa.
	Mach ID	Destination switch ID identified on the dial plan of the
		destination switch.

Processor Channel 32: (The Ethernet side of the gateway)

	Enable	Set to y.
	Appl.	Use gtwy-tcpfor conversion between X.25 and TCP/IP.
	Gateway To	Indicates a software connection between processor channels
		32 and 23.
	Mode	Node-1 is the “server” for this session. Set node-3 to “client”
		(c).
	Interface Link	This must match the link number assigned on the data module
		screen.
	Interface Chan	For TCP/IP, interface channel numbers are in the range 5000
		– 64500.
		The recommended values are: 5001 for CMS, 5002 for Intuity
		AUDIX, and 5003 for DCS connections that are not
		gateways. The combination of Link, Interface Channel, and
		Mach ID must be unique.
		The recommended values for gateway switches is
		6001–6099. The interface channel number must be unique for
		each gateway.
	Destination Node	Name of the far-end node for this channel. This must be a
		name entered on the Node Names screen.
			3 of 4
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000		CID: 77730	111