Lucent Technologies Release 8.2 manual For the call setup. Enter y when administering the data

Configuration 3: R8si<—x.25 —> R8r Gateway		3 C-LAN Administration
<—ethernet—> R8si
	Field	Conditions/Comments
	Enable Link?:	Set to y after the processor channels have been
		assigned.
	Maintenance Extension:	Specified on dial plan.
	Destination Number:	TAC (812) + extension (2102) of the data module on
		the far end that will establish the connection.
	Establish Connection?	n means that the switch at the remote end of this
		connection (Switch 1 in this case) will be responsible
		for the call setup. Enter y when administering the data
		module for Switch 1.
	Connected Data	This is an information-only field.
	Module:
	Keep the default values for the rest of the fields.
		2 of 2

		Administration for Network Connectivity
114	CID: 77730	555-233-504 — Issue 1 — April 2000