Lucent Technologies Release 8.2 manual Qsig

QSIG B Private Networking

•Conference

If a user on a branch calls the attendant and conferences the attendant onto the call, the attendant’s display is not updated with “conference”. There is no QSIG standard defined for Conference and Definity has not implemented conference via MSI.

•Centralized AUDIX

When a user zero’s out of AUDIX, if the host PBX is a QSIG-CAS branch, then the call is sent to the QSIG-CAS attendant.

•DCS+

On an incoming attendant-seeking call, calling-party information may be received at the branch if a call comes from another PBX in the network over a DCS ISDN trunk.

•Dial Access to Attendant

When a user on a branch PBX dials the Dial Access to Attendant number, as administered on the Dial Plan Record screen, the call is sent to an attendant on the main PBX.

•DID/Tie/ISDN Intercept

DID, Tie, and ISDN trunk calls that are intercepted are sent to the attendant on the main.

•Emergency access to attendant

Emergency access may be administered so that if stations are off hook for an extended period of time, then a call is placed to the attendant, or a user can dial an Emergency access to attendant feature access code. Emergency access to the attendant does not go to the attendant on the main PBX. Instead, the call goes to an attendant on the branch PBX. If there is no branch attendant, the call is denied.

•Facility Busy Indication

Facility Busy indication functions as for RLT-CAS.

•Individual Attendant Access

An attendant may be assigned an individual extension so that it is possible to dial that attendant directly rather than dialing the attendant group.

•ISDN (non-QSIG)

On an incoming attendant-seeking call, calling party information may be received at the branch for a call coming in over an ISDN trunk.

•Leave word calling

LWC Message Retrieval is not available for the branch PBX.

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	391