Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)

3 C-LAN Administration

<—ethernet—> R8si

 

 

 

 

 

 

 

 

Field

 

Conditions/Comments

 

 

 

 

 

 

 

COS

 

 

 

 

 

 

The values for these fields will be specified by the system

 

COR:

 

 

 

administrator.

 

 

 

 

 

 

TN:

 

 

 

 

 

 

 

 

 

 

 

Node Name:

 

The node name for the interface defined by this data module.

 

 

 

This must be a name entered on the Node Names screen.

 

 

 

 

 

 

Subnet Mask:

 

 

 

 

 

 

 

 

Establish

 

y means that this switch will be responsible for call setup for

 

Connection?

 

this connection. Enter n when administering the data module for

 

 

 

Switch 2.

 

 

 

 

 

 

Destination

 

Trunk access code (899) plus extension of data module on

 

Digits:

 

node-2 (3020).

 

 

 

 

 

 

Destination

 

Name of the node at the far end of this connection. This must be

 

Node Name:

 

a name entered on the Node Names screen.

 

 

 

 

 

CHAP?

 

This field enables/disables the Challenge Handshake

 

 

 

Authentication Protocol security mechanism on this link. If you

 

 

 

enter y, the system will prompt for a CHAP secret (password).

 

 

 

 

 

 

 

 

 

2 of 2

 

 

 

 

 

 

> Submit the screen

 

 

 

End

 

 

 

 

 

 

 

 

 

Administration for Network Connectivity

150

CID: 77730

555-233-504 — Issue 1 — April 2000

Page 170
Image 170
Lucent Technologies Release 8.2 manual 150 CID