Lucent Technologies Release 8.2 manual Destination Port, Session Local, Session Remote, Mach ID

Networking Screens			A Screens Reference
Destination Port	Identifies the port number of the destination.
	Valid entries		Usage
	0, 5000-64500		The channel number 0 means any available port can be
			used (which will be automatically selected by the system).
Session Local	A number used by the system to identify one end of a connection.
	Valid entries	Usage
	1-128 (csi)	The Local and Remote Session numbers can be any value
	1-256 (si)	between 1 and 256, but they must be consistent between
	1-384 (r)	endpoints. For each connection, the Local Session number on
		the local switch must equal the Remote Session number on the
		remote switch and vice versa.
		It is allowed, and sometimes convenient, to use the same
		number for the Local and Remote Session numbers. For
		example, it is frequently convenient (but not necessary) to use
		the processor channel number for both the session numbers.
		For the qsig-mwiand fp-mwiapplications, the Local
		Session numbers must be unique on the switch. For other
		applications, it is allowed, but not recommended, to use the
		same Session numbers for two or more connections.
Session Remote	See Session Local, above.
Mach ID	The machine identification number.
	Valid entries		Usage
	1-63(si model)		For switches and Intuity AUDIX, the Machine ID is the
			Local Node Number on the dial plan. For the qsig-mwi
			and fp-mwiapplications, the Machine ID is the index used
			on the Message Waiting Indication Subscriber Number
			Prefixes screen. Machine ID is not used for the CMS adjunct.

		Administration for Network Connectivity
276	CID: 77730	555-233-504 — Issue 1 — April 2000