Lucent Technologies Release 8.2 manual Enter y if this PDM is the secondary data module used for

Networking Screens A Screens Reference

Data Module - type pdm (used for BX.25 connections with the r model)

This form applies only to the r model.

This form assigns a Modular Processor Data Module (MPDM) data module (700D, 7400B, 7400D or 8400B). The MPDM is an external hardware device that provides a Data Communications Equipment (DCE) interface for connection to equipment such as data terminals, CDR output devices, on-premises administration terminal, Message Server, Property Management System (PMS), AUDIX, and host computers. It also provides a Digital Communications Protocol (DCP) interface to the digital switch.

Use the tdm data module type to assign an MTDM, which provides an EIA Data Terminal Equipment (DTE) interface for connection to off-premises private line trunk facilities or a switched telecommunications network and a DCP interface for connection to the digital switch.

				Page 1 of 1
		DATA MODULE
Data Extension: 30		Name:	27	BCC:
	Type: pdm_________	COS:	1	Remote Loop-Around Test? n
	Port: _______	COR:	1	Secondary data module? n
	ITC: restricted__	TN:	1	Connected to: dte
ABBREVIATED DIALING
List1:
SPECIAL DIALING OPTION:
ASSIGNED MEMBER (Station with a data extension button for this data module)
Ext	Name
1: 1002	27 character station name

Common Fields	See Common Data Module Fields (256) for descriptions of fields on this screen that
	are not listed below.

Secondary data module Specifies whether this PDM is the primary or secondary data module.

Valid Value	Usage
y/n	Enter y if this PDM is the secondary data module used for
	Dual I-channel AUDIX networking. Enter n if this is the
	primary PDM, or if this data module is not used for AUDIX
	networking. The primary data module must be administered
	before the secondary data module may be added. If Port is
	X, this field must be set to n.

		Administration for Network Connectivity
272	CID: 77730	555-233-504 — Issue 1 — April 2000