Lucent Technologies Release 8.2 manual Submit the screen1

Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)	3 C-LAN Administration
<—ethernet—> R8si

Switch 1 Task — Assign Node Names

This task assigns node names and IP addresses to each node in the network. This screen is administered on Switch 1. A Node Names screen must be administered on each switch in the network.

Note: Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter node names for switches, routers, and CMS starting on page 2.

Steps

Begin

> Open Node Names form — enter ch node-n> Go to page 2

change node-names				Page 2 of 6
		NODE NAMES
Name		IP Address	Name	IP Address
default_________		0__.0__.0__.0__	_______________	___.___.___.___
node-1a-ppp		192.168.10_.11_	_______________	___.___.___.___
node-1a	______	192.168.10_.13_	_______________	___.___.___.___
node-1b	______	192.168.10_.130	_______________	___.___.___.___
node-1b-eth __		192.168.10_.128	_______________	___.___.___.___
node-2____		192.168.10_.12_	_______________	___.___.___.___
node-3____		192.168.10_.129	_______________	___.___.___.___

> Enter values.

Field	Conditions/Comments
Name	Enter unique node names for the following 6 nodes:
	• C-LAN(a) PPP port on Switch 1 for the connection to Switch 2
	• C-LAN(a) PPP port on Switch 1 for the connection to C-LAN(b)
	• C-LAN(b) PPP port on Switch 1 for the connection to C-LAN(a)
	• C-LAN(b) Ethernet port on Switch 1
	• C-LAN PPP port on Switch 2.
	• C-LAN Ethernet port on Switch 3
IP Address	The unique IP addresses of the nodes named in the previous field.

> Submit the screen1

End

		Administration for Network Connectivity
174	CID: 77730	555-233-504 — Issue 1 — April 2000