Lucent Technologies Release 8.2 manual Unrestricted, Test?

Networking Screens A Screens Reference

When adding an access endpoint with the ITC administered as restricted, its associated port can be a channel from a DS1 circuit pack with Zero Code Suppression administered as zcs or b8zs.

For an existing access endpoint, ITC can only be changed from restricted to unrestricted if its associated port is a channel of a DS1 circuit pack with its Zero Code Suppression field administered as b8zs. If the port is on a channel of a DS1 circuit pack with its Zero Code Suppression administered as zcs or b8zs, the end validation fails and the form submission is rejected. Without this end validation, a user could administer an access endpoint as unrestricted when in fact it is restricted, that is its associated port is a member of a DS1 circuit pack that uses ZCS data transmission.

	Valid Entries	Data	Usage
		Module
		Types
	restricted	procr-intf	Use restricted except for wideband endpoints.
	unrestricted	pdm	For unrestricted, only unrestricted
		netcon
			transmission facilities (b8zs and hdb3) will be
		analog-dm
			used to complete the call. An unrestricted
			facility is a transmission facility that does not
			enforce 1’s density digital transmission (that is,
			digital information is sent exactly as is).
			For restricted, either restricted (ami-zcs or
			ami-basic) or unrestricted transmission facilities
			is used to complete the call. A restricted facility
			is a transmission facility that enforces 1’s
			density digital transmission (that is, a sequence
			of eight digital zeros is converted to a sequence
			of seven zeros and a digital one) via zcs coding
			on DS1 circuit pack.
DTE/DCE	Designates the interface defined by this data module as data terminal equipment or
	data communications equipment.
	Valid Entries	Data Module	Usage
		Types
	dte/dce	procr-intf	The DTE/DCE assignments must be
		x.25	opposites on the two ends of the connection.

Remote Loop-AroundActivates/deactivates remote loop-around testing.

Test?

Valid Entries	Data Module	Usage
	Types
y/n	procr-intf	Set to n unless testing.
	pdm

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	261