Lucent Technologies Release 8.2 manual Cos

Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)				3 C-LAN Administration
<—ethernet—> R8si
		Field	Conditions/Comments
		COS
			The values for these fields will be specified by the system
		COR:
			administrator.
		TN:
		Node Name:	The node name for the interface defined by this data module.
			This must be a name entered on the Node Names screen.
		Subnet Mask:
		Establish	n means that the node at the remote end of this connection
		Connection?	(node-1b in this case) will be responsible for the call setup. Enter
			y when administering the data module for node-1b.
		Destination	Not needed if the “Establish Connection?” field is set to n
		Digits:
		Destination	Name of the node at the far end of this connection. Must be a
		Node Name:	name entered on the Node Names screen.
		CHAP?	This field enables/disables the Challenge Handshake
			Authentication Protocol security mechanism on this link. If you
			enter y, the system will prompt for a CHAP secret (password).
				2 of 2
	> Submit the screen
	End

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	181