Distributed Communications System

B Private Networking

 

If AAR is active, FRLs and Traveling Class Marks (TCMs) can be sent along with

 

 

the private network number. UDPCode and AARCode conversions use the FRL

 

 

assigned to the caller. ENPNode conversion always raises the FRL to the

 

 

maximum (7).

 

 

 

If an FRL is insufficient to access the facility, access is denied. There is no prompt

 

 

for an authorization code even if authorization codes are enabled and

 

 

administered.

 

 

If AAR is not active, tandem-tie trunks should not be used to transport UDP

 

 

numbers. The TCM is not recognized at the terminating switch.

 

 

Note: Never use tandem-tie trunks to transport UDP numbers (the TCM

 

 

and Hop count will not be recognized as such following the

 

 

extension received at the receiving switch).

 

Interactions

Automatic Alternate Routing

 

 

 

AAR routes UDP calls. (Included with UDP is the required AAR subset.) If AAR

 

 

is enabled in addition to UDP, then the 7-digit AAR number provides the same

 

 

routing as UDP.

 

 

Dial Plan

 

 

 

~ All of the extension numbers on a switch are not necessarily part of UDP. Any

 

 

that do not belong to UDP are handled by a regular, non-UDP Dial Plan

 

 

associated with the switch.

 

 

 

~ When administering the Dial Plan form and designating a group of extensions

 

 

as UDP non-local, you can specify whether you want to search for local

 

 

extensions first or last. This allows flexibility to change extensions from local

 

 

to non-local and vice-versa.

 

 

DID Trunk Group

 

 

 

DID calls to 5-digit UDP extension numbers require that the DID trunk group

 

 

insert enough digits to make a 5-digit extension number.

 

Distributed Communications System

 

 

 

UDP is required when DCS is provided. The necessary UDP software is provided

 

 

with the DCS software.

 

 

Extension Number Portability

 

 

 

If an extension code is administered to use ENP node routing, ENP routes the call

to the correct switch. If AAR is enabled in addition to UDP, the 7-digit AAR number provides the same routing as UDP (that is, via ENP).

 

 

Administration for Network Connectivity

354

CID: 77730

555-233-504 — Issue 1 — April 2000

Page 374
Image 374
Lucent Technologies Release 8.2 manual 354 CID