Lucent Technologies Release 8.2 manual Primary, Secondary, Location/Name

Other Networking-Related DEFINITY Screens		A Screens Reference
Primary	Enter the 5-character circuit pack location number for the circuit pack that will
	function as the primary synchronization source. The clock circuit pack’s internal
	source is the implicit last choice. Only one switch in the network can function as the
	primary synchronization source. Only displays when the Stratum field is 4.
	The Primary and Secondary synchronization sources (DS1 or BRI trunk facilities)
	must be on the same Port Cabinet (that is, PPN, EPN1, or EPN3).
	Valid entries	Usage
	01 through 44 (G3r)	First and second characters are the cabinet number
	01 through 03 (G3si)
	A through E	Third character is the carrier
	01 through 20	Fourth and fifth characters are the slot number
	blank	A blank entry means no external source.
Secondary	The system will select automatically the secondary circuit pack if the primary circuit
	has a failure. Only displays when the Stratum field is 4.
	The Primary and Secondary synchronization sources (DS1 or BRI trunk facilities)
	must be on the same Port Cabinet (that is, PPN, EPN1, or EPN3).
	Valid entries	Usage
	01 through 44 (G3r)	First and second characters are the cabinet number
	01 through 03 (G3si)
	A through E	Third character is the carrier
	01 through 20	Fourth and fifth characters are the slot number
	blank	A blank entry means no external source.
	Pages 1–X of the screen
Location/Name	Identifies the location and name for each DS1 or BRI trunk circuit pack administered
	via the DS1 or BRI Trunk Circuit Pack screen. Only displays if the Stratum field is 4.
	Valid entries	Usage
	Display-only field.

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	305