Configuration 2: R7r (+CMS) <—ethernet—> R7csi

3 C-LAN Administration

Apply the coverage path to stations, and if the switch is an r model, specify the node name of the Intuity system for each station that has a voice mailbox on the Intuity system.

Intuity system administration

The following procedures must be done on the Intuity system:

Administer the UNIX name and IP address for the Intuity system.

Administer the switch interface link to the host switch. This includes the Extension Length, Host Switch Number, AUDIX Number, Switch Number, Switch IP Address, and TCP Port.

Administer extension numbers, channels, and services.

Administer subscribers.

Administer the TCP/IP Do the following procedures to administer the Intuity system.

Network Addressing

If not already done, you must set up the basic networking addressing for the Intuity system. Do the following:

1Beginning at the Lucent INTUITY Main menu, select:

>TCP/IP Administration

>Network Addressing

The system responds with the Network Addressing window.

+

-------------------------------------------------------

+

+

Network

Addressing

+

+

-------------------------------------------------------

+

TCP/IP Interface: eeE_0

Host Name: denaudix

IP Address: 192.168.1.125

 

Subnet Mask: 192.168.1.224

Default Gateway IP Address: 192.168.1.97

+

-------------------------------------------------------

+

 

 

 

 

2Use Worksheet A to enter the correct values in this window.

3Press F3 (Save).

4Continue with the next procedure, “Administer Switch Interface.”

Administration for Network Connectivity

 

 

555-233-504 — Issue 1 — April 2000

CID: 77730

93

Page 113
Image 113
Lucent Technologies Release 8.2 manual Intuity system administration, Network Addressing