Lucent Technologies Release 8.2 Secondary D-channel, Max Number of NCA TSC, Max number of CA TSC

Networking Screens A Screens Reference

Secondary D-channel

Enter a 6- to 7-character port number associated with the DS1 Interface circuit pack port used for secondary D-channel signaling. Displays when the Associated Signaling field is n (indicates NFAS). The port number assigns the secondary D-channel in the Signaling Group. For 24-channel facilities, the 24th port is assigned as the D-channel. For 32-channel facilities, the 16th port is assigned as the D-channel.

Valid entries	Usage
01 through 44 (G3r)	First and second characters are the cabinet number
01 through 03 (G3si)
A through E	Third character is the carrier
01 through 20	Fourth and fifth characters are the slot number
16 or 24	Sixth and seventh characters are the port
blank

Max Number of NCA TSC

The maximum number of simultaneous Non-Call Associated Temporary Signaling Connections (NCA-TSCs) that can exist in the Signaling Group. This number includes all NCA-TSCs that are administered on this screen and those NCA-TSCs that tandem through the switch in-route to another switch in the network.

Valid entries Usage

0to 256.

Max number of CA TSC

The maximum number of simultaneous Call Associated Temporary Signaling Connections (CA-TSCs) that can exist in the Signaling Group. Typically, the number of ISDN-PRI trunk group members controlled by the Signaling Group.

Valid entries Usage

0to 400.

Trunk Group For NCA TSC

The ISDN-PRI trunk group number whose incoming call handling table will be used to handle incoming NCA-TSCs through the Signaling Group. Enter the assigned ISDN-PRI trunk group number whose call handling table will be used to route the incoming NCA TSCs. (An ISDN-BRI trunk group may not be used.)

Valid entries Usage

1to 99. blank

		Administration for Network Connectivity
282	CID: 77730	555-233-504 — Issue 1 — April 2000