Lucent Technologies Release 8.2 manual Interface Link, Interface Chan

Networking Screens				A Screens Reference
Interface Link	Identifies the physical link carrying this processor (virtual) channel.
	Valid entries	Usage
	1-25(csi, si)	For the csi model, all links (up to 25) must be used for tcp/ip
	1-33 (r)	connections.
		For the si model, links numbered 1 through (4 times the number
		of PI circuit packs) can be either x.25 or tcp/ip. The rest of the
		links (up to 25) must be tcp/ip.
		For the r model, links numbered 1 through (4 times the number
		of PGATE circuit packs) can be either x.25 or tcp/ip. The rest
		of the links (up to 33) must be tcp/ip.
Interface Chan	Identifies the BX.25 virtual channel number or the TCP/IP listen port channel to carry
	this processor (virtual) channel.
	Valid entries		Usage
	1-64(x.25)		The channel number 0 means any available port can be used
	0, 5000-64500		(which will be automatically selected by the system).
	(ethernet or ppp)		For TCP/IP connections, the following values are
			recommended:
			• 5001 CMS (Appl. = mis)
			• 5002 Intuity AUDIX (Appl. = audix)
			• 5003 DCS (Appl. = dcs, not a gateway)
				These three values should be reused for multiple
				instances of these applications; for example, if there are
				two Intuity AUDIX’s, use 5002 for both; or if there are
				four DEFINITY ECS’s, use 5003 for all four. The
				combination of Link, Interface Channel, and Mach ID
				must be unique.
			• 6000 + (Appl. = gtwy-tcp)
			The Interface Channel number must be unique for the
			gtwy-tcpand gateway application types.
Destination Node	Identifies the switch or adjunct at the far end of this link.
	Valid entries			Usage
	A node name previously			This must be a name entered on the Node Names screen.
	entered on the Node			For ppp connections, it must match the Destination
	Names screen or blank.			Node Name entered on the ppp Data Module screen.

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	275