Lucent Technologies Release 8.2 manual AARCode ENPNode Local TempOOS, Location Code

Other Networking-Related DEFINITY Screens			A Screens Reference
Type	Specify the type of treatment for the extension. That is, specify whether the extension
	should receive intercept treatment, be converted to AAR, or be converted via ENP.
	The difference between AAR Location Codes and UDP Location Codes is that 7-digit
	AAR Numbers created from AAR Location Codes may be changed during AAR
	analysis by AAR digit conversion before being routed. Seven-digit AAR Numbers
	created from UDP Location Codes are not subject to digit conversion before being
	routed with AAR digit analysis.When an extension code that is displayed on the UDP
	screen is not administrable because it conflicts with the translations in the first and/or
	second digit tables, then the type field for that extension code displays "NotInDP."
	Valid entries	Usage
	AARCode
	ENPNode
	Local
	TempOOS	The entry TempOOS indicates an extension is temporarily
		out-of-service. Calls to these extensions receive reorder.
	UDPCode
	blank	A blank entry indicates this Ext code is not administered. If no
		matching code can be found, then the call receives intercept
		treatment.
Location Code	Specify the 3-digit location code for Ext Codes administered with a type of AARCode
	or UDPCode. This field displays if AARCode or UDPCode is entered as the type.
Node Number	Specify the node number for Ext Codes administered with a type of ENPNode. This
	field pops up if ENPNode is entered as the type.

Note: Note: This node number must not be the same as the local node number on the dial plan screen.

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	309