Lucent Technologies Release 8.2 manual Checklist for Prerequisite Administration, Otherwise

Overview 3 C-LAN Administration

Checklist for Prerequisite Administration

This is a checklist of things that need to be completed before you can proceed with the network administration tasks. Review this checklist before starting the administration tasks.

✔

Checklist Item

The prerequisite administration needed depends on whether the system is new or is being upgraded from an R7 or pre-R7 system to R8. Use the following map to determine which steps to perform.

New

R7

Pre-R7 si with ISDN connections to be preserved

1 2 3 4 5 6 7

Other Pre-R7

For more information about the checklist items, refer to Appendix A or the appropriate upgrades book in "References", page 56.

UPGRADES ONLY: Steps 1–6 apply only to systems being upgraded to R8 from an R7 or pre-R7 release. For new systems, skip to step 7.

1Save translations on customer flash card (csi or si models) or tape (r model). For R7 systems, skip to step 5.

2This step is for the si model only. It preserves ISDN-PRI connections, which (for R7 and later) are carried on the NetPkt circuit pack instead of the PI or PACCON circuit packs. ISDN-PRI connections are preserved transparently on the csi and r models.

If:

the si switch has existing ISDN-PRI connections that the customer wants to keep, complete the following steps:

~De-administer the ISDN-PRI connections:

•busy the ISDN links

•remove comm-interface links of type ISDN

•remove comm-interface processor channels that use ISDN links

•remove data modules using those links

~Save translations on a “working” flash card

Otherwise:

skip to step 3.

1 of 3

		Administration for Network Connectivity
54	CID: 77730	555-233-504 — Issue 1 — April 2000