Lucent Technologies Release 8.2 manual Setting Up Qsig Valu Steps Call Coverage

QSIG	B Private Networking
Setting Up QSIG VALU	Steps
Call Coverage
	Begin
	1 Enable the QSIG Basic Supplementary Services on the Customer Options screen,
	page 6, described above.
	2 Enable (enter y) Value-Added Lucent (VALU) on the System-Parameters
	Customer-Options screen, page 6, as described above.
	3 On a Trunk Group screen, enter y in the QSIG Value-Added Lucent field, page 1,
	and sent b in the supplementary Service Protocol Option field, page 1.
	4 Administer the System Parameters Call Coverage/Call Forwarding screen as
	normal, with the inclusion of the following fields:
	• Immediate Redirection on Receipt of PROGRESS Inband Information,
	page 1 — Enter y to speed up redirection of subsequent coverage points or
	call processing. This may be necessary in cases where coverage path
	endpoints over non-Lucent switches are unavailable but the QSIG
	networked switch (or the public network) sends PROGRESS messages
	that delay the local switch from redirecting the call elsewhere. If the QSIG
	network contains only DEFINITY switches, enter n.
	• QSIG VALU Coverage Overrides QSIG Diversion with Rerouting, page 1
	— Enter y to ensure that the "coverage after forwarding"
	activation/deactivation defined at a user’s phone (via Station screen) takes
	precedence over the system-wide "coverage after forwarding"
	activation/deactivation selection (via the System Parameters Call
	Coverage/Call Forwarding screen). With QSIG Diversion with Rerouting
	active, the system-wide selection takes precedence unless you enter y.
	See the examples in the following table: .

Table 2. Coverage with QSIG Diversion with Rerouting

Cvg. After	Cvg. After	QSIG VALU	Then
Fwd	Pwd (Sys.	Coverage
(Station	Parms.	Overrides
Screen)	Coverage	QSIG
	Screen)	Diversion
			Call doesn’t go to local user’s
y	n	n	coverage after failed forward
			attempt. Call control passed to
			switch to which call forwarded.
y	n	y	Call goes to local user’s coverage
			after failed forward attempt.
n	y	n	Call goes to local user’s coverage
			after failed forward attempt.
			Call doesn’t go to local user’s
n	y	y	coverage after failed forward
			attempt. Call control passed to
			switch to which call forwarded.

		Administration for Network Connectivity
376	CID: 77730	555-233-504 — Issue 1 — April 2000