Lucent Technologies Release 8.2 manual Cos

Networking Screens A Screens Reference

Data Module — Type procr-intf(used for BX.25 connections with the si model)

Use the procr-intf data module type to define an interface between the Processor Interface circuit pack and the DS1 facilities carrying the X.25 data for the connection to far end switch. This data module associates a link number with a physical channel number and extension number for the PI port used for the connection.

This form applies when the Destination Number field is not set to eia.

add data-module next					Page 1 of 1
			DATA MODULE
Data Extension:	3456		Name: ____________________
Type: procr-intf			COS:	1	Maintenance Extension: ____
Physical Channel: __			COR:	1	Destination Number: ______
ITC: __________			TN:	1	Establish Connection? n
Link: __		DTE/DCE:		DTE	Connected Data Module: __________
		Enable	Link:	n

ABBREVIATED DIALING

List1: _______________

SPECIAL DIALING OPTION: hot-line

HOT LINE DESTINATION

Abbreviated Dialing Dial Code (From above list): _

ASSIGNED MEMBER (Station with a data extension button for this data module)

Ext	Name
1.
	This form applies when the Destination Number field is set to eia (and Link = 1).
add data-module next			Page 1 of 1
		DATA MODULE
Data Extension:	3456	Name: ____________________
Type:	procr-intf	COS: 1	Maintenance Extension: ____
Physical Channel:	__	COR: 1	Destination Number: eia___
ITC:	__________	TN: 1	Establish Connection? n

Link: 1_	DTE/DCE: DTE	Connected To: ___
	Enable Link: n	Clocking: ______
ABBREVIATED DIALING
List1: _______________

SPECIAL DIALING OPTION: ____

HOT LINE DESTINATION

Abbreviated Dialing Dial Code (From above list):			_
ASSIGNED MEMBER (Station with a		data extension button for	this data module)
Ext	Name
1.

		Administration for Network Connectivity
266	CID: 77730	555-233-504 — Issue 1 — April 2000