Lucent Technologies Release 8.2 manual Transit Counter, Call Completion

QSIG		B Private Networking
	• Data-Call Setup
		A data call is denied ANF-PR.
	•	Data Privacy
		If Data Privacy is active, ANF-PR is denied.
	•	Data Restriction
		If Data Restriction is active, ANF-PR is denied.
	•	Malicious Call Trace
		If MCT is active, ANF-PR is denied.
	•	Recorded Announcement
		A call that is receiving a recorded announcement cannot have its path replaced.
	•	Trunk Access Code
		The paths of outgoing calls made using a TAC are not replaced.
	•	Voice Terminals
		Voice terminal displays that show trunk group name should update with new trunk
		group information after ANF-PR occurs. Calling and connected party displays are
		not disturbed when ANF-PR takes place if the original display shows the
		connected party name, number, or both.
Transit Counter	•	Call Forwarding (Diversion)
		When call forwarding (Diversion) occurs and the ANF-TC feature is enabled, the
		transit counter is set to zero.
	• ISDN Trunk Group Administration
		If all of the conditions are satisfied for both the Tandem Hop Limitation and
		ANF-TC, ANF-TC takes precedence. In situations where DEFINITY ECS is an
		Incoming or Outgoing Gateway, either makes use of the hop count/transit count
		information provided by the other.
	•	Trunk Access Code
		ANF-TC does not apply to TAC calls.
Call Completion	•	Adjunct Switch Applications Interface (ASAI)
		ASAI cannot invoke/initiate QSIG-CC.
	•	Attendant Calling Waiting and Call Waiting Termination
		If you activate QSIG SS-CC to a single line voice terminal, the Attendant Call
		Waiting and Call Waiting Termination features are denied.
	•	Attendant Console Group
		You cannot activate QSIG SS-CC toward the attendant console group or towards
		the individual attendant.

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	381