Lucent Technologies Release 8.2 manual Task 7 Specify codecs, Task 7 Steps

H.323 Trunk Administration 2 H.323 Trunks

Task 7 — Specify codecs

This task modifies the IP Media Parameters screen to specify the type of codecs available on this switch and the preferred order of use of the different types.

Task 7 Steps

Begin

> Open the IP Parameters screen — enter ch ip-p

	change ip-parameters	Page 1 of 1
		IP Media Parameters
	Audio Codec
	Preferences
	1: G.711MU
	2: G.723-6.3K
	3: G.729A
	4:
	UDP Port Range
	Min: 2048
	Max: 65535 n
> Enter values
	Field	Conditions/Comments
	Audio Codec Preferences	Enter up to four codec types in the order of
		preference of use. Valid types are: G711A, G711Mu,
		G723-6.3k, G723-5.3k, G.729A.
		Note: The codec ordering must be the same on
		DEFINITY switches at both ends of an
		H.323 trunk connection. The set of
		codecs listed need not be the same, but
		the order of the listed codecs must be the
		same.
		See IP Parameters (page 34) for a description of the
		differences between codec types.
	UDP Port Range	Enter a minimum and maximum port number to
		specify a block of port numbers to be used for audio
		connections. Valid values are 1 to 65535, with Min <
		Max.
> Submit the screen
	End

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	49