Lucent Technologies Release 8.2 manual 194 CID

Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)			3 C-LAN Administration
<—ethernet—> R8si
	Field	Conditions/Comments
	Session - Local	The Local and Remote Session numbers can be any value
		between 1 and 256 (si model) or 384 (r model), but they
	Session - Remote
		must be consistent between endpoints. For each
		connection, the Local Session number on this switch must
		equal the Remote Session number on the remote switch
		and vice versa.
		It is allowed, and sometimes convenient, to use the same
		number for the Local and Remote Session numbers. It is
		allowed, but not recommended, to use the same Session
		numbers for two or more connections.
	Mach ID	Destination switch ID identified on the dial plan of the
		destination switch.

For Processor Channel 23: (connection to Switch 3 through Switch 1)

	Enable	Set to y.
	Appl.	Set to dcs for DCS signaling.
	Mode	Node-2 is the “client” for this session. Set node-3 to
		“server” ( s).
	Interface Link	This must match the link number assigned on the node-2
		data module screen.
	Interface Chan	A value of 0 allows any available interface channel to be
		used for this connection. The Destination Port number on
		the Switch-3 Processor Channel screen must also be set to
		0.
	Destination Node	Name of the far-end node for this channel. This must be a
		name entered on the Node Names screen.
	Destination Port	This number must match the Interface Channel number
		assigned on the Switch-3 Processor Channel screen.
	Session - Local	For each connection, the Local Session number on this
		switch must equal the Remote Session number on the
	Session - Remote
		remote switch and vice versa.
	Mach ID	Destination switch ID identified on the dial plan of the
		destination switch.
		2 of 2
> Submit the screen
End

		Administration for Network Connectivity
194	CID: 77730	555-233-504 — Issue 1 — April 2000