Lucent Technologies Release 8.2 manual Calling Party Number to AUDIX? y

QSIG B Private Networking

See the Octel Serenade documentation for Serenade administration.

Steps

Begin

1(Local node message center switch only) Complete the Processor Channel Assignment screen (see Appendix A).

2(Local node message center switch only) Complete the Message Waiting Indication Subscriber Number Prefixes screen (see Appendix A).

3(Local node message center switch only) Complete the Station screen as specified in the Intuity or DEFINITY AUDIX documentation. Ensure that Page 2 of the screen has the following field entry:

•MWI Served User Type - qsig-mwi

4(Served user switch only) On the Hunt Group screen, set the following fields for the AUDIX hunt group:

•Message Center - qsig-mwi

•Voice Mail Number - the desired number

•Routing Digits (for example, AAR/ARS Access Code) - the desired number.

Digits entered in these fields should be selected so that the processing of these digits by the served user switch results in a call being redirected to the message center switch by an ISDN-PRI supplementary service protocol “b” facility. For example, if the message center switch is a DEFINITY ECS, the digits entered should reroute the call to the AUDIX hunt group on the message center DEFINITY ECS switch.

•Calling Party Number to AUDIX? - y

End

		Administration for Network Connectivity
378	CID: 77730	555-233-504 — Issue 1 — April 2000