Lucent Technologies Release 8.2 manual 144 CID

Configuration 4: R8csi <—ISDN—> R8si Gateway			3 C-LAN Administration
<—ppp—> R8csi
	Field	Conditions/Comments
	Session - Local	The Local and Remote Session numbers can be any value
		between 1 and 256 (si model) or 384 (r model), but they must
	Session -
		be consistent between endpoints. For each connection, the
	Remote
		Local Session number on this switch must equal the Remote
		Session number on the remote switch and vice versa.
		It is allowed, and sometimes convenient, to use the same
		number for the Local and Remote Session numbers. It is
		allowed, but not recommended, to use the same Session
		numbers for two or more connections.
	Mach ID	Destination switch ID identified on the dial plan of the
		destination switch.

Processor Channel 32: (connection to Switch 1 for gateway to Switch 2)

Enable	Set to y.
Appl.:	Set to dcs for DCS signaling.
Mode	Node-3 is the “client” for this session. Set node-1 to “server”
	(s).
Interface Link	This must match the link number assigned on the data module
	screen.
Interface Chan	A value of 0 allows any available interface channel to be used
	for this connection. This number must match the Destination
	Port number on the Switch-1 Processor Channel screen.
Destination	Node name for the gateway through which the destination is
Node	reached. This must be a name entered on the Node Names
	screen. For ppp connections, it must match the Destination
	Node Name entered on the ppp Data Module screen.
Destination Port	This must match the Interface Channel number assigned on
	the Switch-1 Processor Channel screen.
Session - Local	For each connection, the Local Session number on this switch
Session -	must equal the Remote Session number on the remote switch
	and vice versa.
Remote
Mach ID	Destination switch ID identified on the dial plan of the
	destination switch.
	2 of 2
> Submit the screen
End

		Administration for Network Connectivity
144	CID: 77730	555-233-504 — Issue 1 — April 2000