Lucent Technologies Release 8.2 manual 65535

Networking Screens		A Screens Reference
	Far-end Listen Port
.
	Valid entries	Usage
	blank or	Optional. If entered, the same number as entered in
	0–65535	the Near-end Listen Port field is recommended; if not
		left blank, this number must match the number
		entered in the Near-end Listen Port field on the
		signaling group form for the far-end switch.
	IRQ Required?
.
	Valid entries	Usage
	y	Leave the default (n) if the far-end switch is a
	n (default)	DEFINITY ECS. Set to y only if the far-end switch is
		a non-DEFINITY switch and requires a location
		request (to obtain a signaling address) in its signaling
		protocol.
	Calls Share IP signaling connection?
.
	Valid entries	Usage
	y	Enter y for inter-DEFINITY connections. Otherwise,
	n (default)	leave the default (n).
	Bypass if IP Threshold Exceeded?
.
	Valid entries	Usage
	y	Set to y to automatically remove from service trunks
	n (default)	assigned to this signaling group when IP transport
		performance falls below limits administered on the
		Maintenance-Related System Parameters (sys par
		maint) screen.

Internetworking Message

Specifies whether the system sends alerting or progress if an incoming trunk call is routed to a non-ISDN trunk group (for example, CO or tie). This field is administerable on a per-port basis.

.

Valid entries Usage

PROGress (default)

ALERTing

		Administration for Network Connectivity
288	CID: 77730	555-233-504 — Issue 1 — April 2000