Lucent Technologies Release 8.2 manual Nncsspp, Valid Data Module Usage Entries Types, Port, Link

Networking Screens									A Screens Reference
Port	Seven characters to specify the port location for this data module in the format
	NNCSSPP.
	Valid Entries					Data Module			Usage
						Types
	NN = cabinet number:					ppp			You can enter x in the Port field
	• 01 – 44 (r model)					ethernet			to indicate that there is no
						x.25			hardware associated with the port
	• 01 – 03 (si model)
						pdm			assignment (Administration
	•	01 (csi model)							Without Hardware).
	C = carrier position: a – e
	SS = slot number: 00 – 20
	PP = port number: 01 – 16
Link	The communication interface link number associated to this data module.
	Valid Entries				Data Module			Usage
					Types
	•	1-33r model			ppp			Indicates the interface link number that
	•	1–25si model			ethernet			connects to another node in a DCS
					procr-intf			network, a Message Server, CMS, SDN
	•	1–25csi model			x.25			Gateway, or AUDIX.
Name	Descriptive label for the data module.
	Valid Entries			Data Module			Usage
				Types
	0-27			ppp			This field is not used by the system software.
	alphanumeric			ethernet			Enter a descriptive name for ease in
	characters.			procr-intf			identifying the data module. The contents of
	Default is			x.25			this field are displayed when the list data
	blank.			pdm			module command is used.
COS	Class of service. COS specifies a group of feature-access permissions of a group of
	telephones.
	Valid		Data Module			Usage
	Entries		Types
	0-15		ppp			The value for this fields will be specified by the
	Default is 1		procr-intf			system administrator.
			pdm

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	257