Lucent Technologies Release 8.2 manual 388 CID

QSIG B Private Networking

•Attendant Control of Trunk Group Access

Attendant control of trunk group access for QSIG-CAS functions as for RLT-CAS.

•Attendant Crisis Alert

Attendant crisis alert for QSIG-CAS functions as for RLT-CAS.

•Attendant Direct Extension Selection With Busy Lamp (standard and enhanced)

For QSIG-CAS the DXS allows attendants to use the DXS for monitoring and placing calls to users on the main PBX and for placing calls to users on a branch PBX only when UDP is used.

•Attendant Group and Tenant Partitioning

Attendant Group and Tenant Partitioning are local features that do not require QSIG signaling on the main.

Attendant Group and Tenant Partitioning do not function on a CAS branch. You can administer tenant partitioning and multiple attendant groups on a branch PBX. However, all attendant-seeking calls at the branch PBX are directed to the QSIG-CAS number, as administered on the console-parameters form, regardless of any tenant partition. If the QSIG-CAS number corresponds to the Dial Access to Attendant number at the main or to a VDN that eventually routes to the Dial Access to Attendant number at the main, the call is directed to the attendant group assigned to the tenant partition of the incoming trunk to the main.

•Attendant Interposition Calling and Transfer

Attendant Interposition calling and transfer is a local feature that remains unchanged by QSIG-CAS. Attendants on the main still have the ability to call and transfer to each other using Individual Attendant Extensions.

•Attendant Intrusion

As with RLT-CAS, Intrusion is not be available in QSIG-CAS to calls that are incoming from a branch.

•Attendant Misoperation

Misoperation is used only in France and Italy. It is a local feature and functions as for RLT-CAS. If the system goes into Night Service while an attendant has a call on hold, the call realerts at the attendant console. If it is unanswered after an administrable amount of time, the call begins alerting at the night service destination.

•Attendant Override of Diversion

As with RLT-CAS, Override of Diversion is not available in QSIG-CAS for calls incoming from a branch.

•Attendant Recall

As with RLT-CAS, Attendant Recall is not available in QSIG-CAS to calls incoming from the branch.

		Administration for Network Connectivity
388	CID: 77730	555-233-504 — Issue 1 — April 2000