Lucent Technologies Release 8.2 Networking Screens Screens Reference, Valid entries Usage

Networking Screens A Screens Reference

Networking Screens

Node Names

In this context, a node is defined as any of the following — a C-LAN port, a bridge or router, a CMS ethernet port, or an Intuity AUDIX, or other MSA (Message Server Adjunct) network interface card. The AUDIX and MSA node name and IP address must be entered on page 1 of the screen. The data for all other node types, including CMS, must be entered on pages 2–6 .

The Node Names form holds up to 8 Audix node names with up to 7 characters each, up to 7 MSA node names (up to 7 characters each) on page 1. It holds up to 160 non-specific node names (up to 15 characters each) for DCS, CMS, or bridge/router nodes, on pages 2–6.

The node names and IP addresses in any network should be assigned in a logical and consistent manner from the point of view of the whole network. These names and addresses should be assigned in the planning stages of the network and should be available from the customer system administrator or from a Lucent representative.

vwla

lphp

I

lju

OI

page 1

					page 1 of 6
			NODE NAMES
	Audix Name	IP address		MSA Names	IP Address
1.	audix _	___.___.___.___ 1. msa__ _			___.___.___.___
2.	_______	___.___.___.___ 2. _______			___.___.___.___
3.	_______	___.___.___.___ 3. _______			___.___.___.___
4.	_______	___.___.___.___ 4. _______			___.___.___.___
5.	_______	___.___.___.___ 5.		_______	___.___.___.___
6.	_______	___.___.___.___ 6.		_______	___.___.___.___
7.	_______	___.___.___.___ 7.		_______	___.___.___.___
8.	_______	___.___.___.___

Audix or MSA Name Identifies the name of the AUDIX or Message Server Adjunct (MSA) node.

Valid entries	Usage
1-7 alphanumeric characters with no	Used as a label for the associated IP
embedded spaces.	address. The node names must be unique
Defaults:	on each switch.
audix, msa (csi, si)
blank (r)

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	245