Lucent Technologies Release 8.2 manual Cos, Cor, Bcc, Chap?

Configuration 1: R8r <—ppp—> R8si		3 C-LAN Administration
	Field	Conditions/Comments
	COS
		The values for these fields will be specified by the system
	COR:
		administrator.
	TN:
	BCC:	Bearer Capability Class. This is a display-only field.
	Node Name:	The node name for the interface (C-LAN port) defined by this
		data module. This must be a name previously entered on the
		Node Names screen.
	Subnet Mask:
	Establish	y means that this switch will be responsible for the call setup for
	Connection?	this connection. Enter n when administering the data module for
		Switch 2.
	Destination	Trunk access code (611) plus extension of data module on node 2
	Digits:	(3020). If you use just the extension, then you must administer
		UDP and AAR route patterns to access the correct trunk group.
	Destination	Name of the node at the far end (Switch 2) of this connection.
	Node Name:	This must be a name entered on the Node Names screen (on both
		switches).
	CHAP?	This field enables/disables the Challenge Handshake
		Authentication Protocol security mechanism on this link. If you
		enter y, another field will appear prompting for a CHAP secret
		(password).
		2 of 2
	> Submit the screen
	End

		Administration for Network Connectivity
64	CID: 77730	555-233-504 — Issue 1 — April 2000