Lucent Technologies Release 8.2 manual Node Name Name entered on the Node Names screen

Configuration 4: R8csi <—ISDN—> R8si Gateway					3 C-LAN Administration
<—ppp—> R8csi
		Field		Conditions/Comments
		BCC:		Bearer Capability Class. This is a display-only field.
		COS
				The values for these fields will be specified by the system
		COR:
				administrator.
		TN:
		Node Name:		The node name for the interface defined by this data module.
				This must be a name entered on the Node Names screen.
		Establish		y means that this switch will be responsible for call setup for this
		Connection?		connection. Enter n when administering the data module for
				Switch 3.
		Destination		Trunk access code (79) plus extension of data module on node-3
		Digits:	(2801).
		Destination		Name of the node at the far end of this connection. This must be a
		Node Name:		name entered on the Node Names screen
		CHAP?		This field enables/disables the Challenge Handshake
				Authentication Protocol security mechanism on this link. If you
				enter y, the system will prompt for a CHAP secret (password).
					2 of 2
	> Submit the screen
	End

		Administration for Network Connectivity
128	CID: 77730	555-233-504 — Issue 1 — April 2000