Lucent Technologies Release 8.2 manual This is a display-only field

Configuration 1: R8r <—ppp—> R8si		3 C-LAN Administration
	Field	Conditions/Comments
	COS
		The values for these fields will be specified by the system
	COR:
		administrator.
	TN:
	BCC:	This is a display-only field.
	Node Name:	The node name for the interface (C-LAN port) defined by this
		data module. This must be a name entered on the Node Names
		screen.
	Subnet Mask:
	Establish	n means that the switch at the remote end of this connection
	Connection?	(Switch 1 in this case) will be responsible for the call setup.
		Enter y when administering the data module for Switch 1.
	Destination	Not needed if the “Establish Connection?” field is set to n
	Digits:
	Destination	Name of the node at the far end (Switch 1) of this connection.
	Node Name:	Must be a name entered on the Node Names screen.
	CHAP?	This field enables/disables the Challenge Handshake
		Authentication Protocol security mechanism on this link. If you
		enter y, the system will prompt for a CHAP secret (password).
		2 of 2

>Press the ENTER/SAVE key to save and exit

End

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	69