Lucent Technologies Release 8.2 manual 176 CID

Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)				3 C-LAN Administration
<—ethernet—> R8si
	Field		Conditions/Comments
	COS
			The values for these fields will be specified by the system
	COR:
			administrator.
	TN:
	Node Name:		The node name for the interface defined by this data module. This
			must be a name entered on the Node Names screen.
	Establish		y means that this switch will be responsible for the call setup.
	Connection?		Enter n when administering the data module for Switch 2.
	Destination		Trunk access code (899) plus extension of data module on node-2
	Digits:	(3020).
	Destination		Name of the node at the far end of this connection. Must be a
	Node Name:		name entered on the Node Names screen
	CHAP?		This field enables/disables the Challenge Handshake
			Authentication Protocol security mechanism on this link. If you
			enter y, the system will prompt for a CHAP secret (password).
				2 of 2
	> Submit the screen
	End

		Administration for Network Connectivity
176	CID: 77730	555-233-504 — Issue 1 — April 2000