Lucent Technologies Release 8.2 manual Local Session number on this switch must equal

Configuration 1: R8r <—ppp—> R8si		3 C-LAN Administration
	Field	Conditions/Comments
	Destination Node	Name of the far-end node for this channel. This must be a
		name entered on the Node Names screen. For ppp
		connections, it must match the Destination Node Name
		entered on the ppp Data Module screen.
	Destination Port	A value of 0 allows any available interface channel on the
		destination node to be used for this connection. The
		Interface Channel number for this connection on the
		Switch-2 Processor Channel screen must also be set to 0.
	Session - Local	The Local and Remote Session numbers can be any value
		between 1 and 256 (si model) or 384 (r model), but they
	Session - Remote
		must be consistent between endpoints. For each connection,
		the Local Session number on this switch must equal the
		Remote Session number on the remote switch and vice
		versa.
		It is allowed, and sometimes convenient, to use the same
		number for the Local and Remote Session numbers. It is
		allowed, but not recommended, to use the same Session
		numbers for two or more connections.
	Mach ID	Destination switch ID identified on the dial plan of the
		destination switch (in the Local Node Number field).
		2 of 2
	>Submit the screen
	End

		Administration for Network Connectivity
66	CID: 77730	555-233-504 — Issue 1 — April 2000