Lucent Technologies Release 8.2 manual If using DCS, go to screen, Pbx Id

H.323 Trunk Administration				2 H.323 Trunks
> If using DCS, go to screen page 2
add trunk-group n	TRUNK FEATURES		Page	2 of 10
ACA Assignment? n	Measured: none		Wideband Support? n
	Internal Alert? n		Maintenance Tests? y
	Data Restriction? n		NCA-TSC Trunk Member:
	Send Name: n		Send Calling Number: n
Used for DCS? y	PBX ID: 4
Suppress # Outpulsing? n			DCS Signaling: d-chan
Outgoing Channel ID Encoding: exclusive		UUI IE Treatment: service-provider
		Replace Restricted Numbers? n
		Replace Unavailable Numbers? n
			Send Connected Number: n
Send UCID? n
Send Codeset 6/7 LAI IE? y

> Enter values
Field		Conditions/Comments
Used for DCS?		Enter y.
PBX ID:		Enter the switch ID. This is the value in the
		Destination Node Number field on the Dial Plan
		Record screen of the remote switch.
DCS Signaling:		Enter d-chan.
Note:		These fields may need to be changed if the
•	Send Name	far-end is a non-DEFINITY switch.
•	Send Calling Number
•	Send Connected Number

> Go to page 4

add trunk-group 3				Page 4 of	10
		TRUNK GROUP
			Administered Members (min/max):		0/0
GROUP MEMBER ASSIGNMENTS				Total Administered Members:	0
Port	Code Sfx Name		Night	Sig Grp
1: ip	H.323	Tr 1		3
2: ip	H.323	Tr 2		3
3: ip	H.323	Tr 3		3

4:

5:

Note: Each signaling group can support up to 31 trunks. If you need more than 31 trunks between the same two switches, add a second signaling group with different listen ports, and add a second trunk group. See Signaling group assignments (page 50) for more information about the relationship between signaling groups and H.323 trunk groups.

		Administration for Network Connectivity
46	CID: 77730	555-233-504 — Issue 1 — April 2000