Lucent Technologies Release 8.2 manual Must equal the Remote Session number on the remote switch

Configuration 4: R8csi <—ISDN—> R8si Gateway			3 C-LAN Administration
<—ppp—> R8csi
	Field	Conditions/Comments
	Destination	Name of the far-end node for this channel. This must be a name
	Node	entered on the Node Names screen. For ppp connections, it must
		match the Destination Node Name entered on the ppp Data
		Module screen.
	Destination	A value of 0 allows any available interface channel on the
	Port	destination node to be used for this connection. The Interface
		Channel number for this connection on the Switch-2 Processor
		Channel screen must also be set to 0.
	Session -	For each connection, the Local Session number on this switch
	Local
		must equal the Remote Session number on the remote switch and
	Session -
		vice versa.
	Remote
	Mach ID	Leave blank for gateway applications.
			3 of 3
	> Submit the screen
	End

Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000	CID: 77730	131