Lucent Technologies Release 8.2 manual Lgate, TN802

Networking Screens		A Screens Reference
Code	Enter the circuit pack code. If there is a physical circuit pack installed in the slot, the
	entry must match that of the circuit pack. If there is equipment administered on a slot,
	the equipment must be removed from the circuit pack before the circuit pack can be
	changed or removed.
	Valid entries	Usage
	TN followed by a 3- or
	4-digit number of a valid
	DEFINITY circuit pack.
	a valid ADXxxx number
	a valid ASAIxx number
	a valid DIGx number
	LGATE
	TN802	For the IP Interface assembly (TN802B/MAPD).
		There must be at least two empty slots preceding the
		slot administered as code TN802. The Code field for
		these empty slots will automatically be populated
		with DSMAPD, which must be changed to
		MEDPRO for the MedPro mode of the IP
		Interface/TN802B.

Sfx	Enter the circuit pack suffix, if applicable.
	Valid entries		Usage
	B to Z
	blank
Mode	This is a display-only field that shows the circuit pack mode, if applicable.
	Note:
	Valid entries		Usage
	Display-only field.
Name	This is a display-only field showing the alphanumeric name of the circuit pack (such
	as Digital Line).
	Note: Note: When the circuit pack physically inserted in the slot differs from
	what has been administered on this screen, a "#" displays between the Sfx
	and Name fields.
	Valid entries		Usage
	Display-only field.
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000		CID: 77730	279