Lucent Technologies Release 8.2 Task 2 Define IP Interfaces, Enter c-lan or medpro, Task 2 Steps

H.323 Trunk Administration 2 H.323 Trunks

Task 2 — Define IP Interfaces

The IP interface for each C-LAN and MedPro board on the switch must be defined on the IP Interfaces form. Each DEFINITY switch in an IP network has one IP Interfaces form.

Task 2 Steps

Begin

> Open IP Interfaces form — enter ch ip-i

change	ip-interfaces					Page	1 of	2
				IP Interfaces
Inter-region		IP connectivity allowed?			n
Enable									Net
Eth Pt Type		Slot	Code Sfx	Node Name	Subnet Mask	Gateway Addr			Rgn
y	C-LAN	01A10	TN799 B	clan-a1	255.255.255.0	192.168.10 .100			1
y	MEDPRO	01A13	TN802 B	medpro-a1	255.255.255.0	192.168.10 .100			1
y	MEDPRO	01A16	TN802 B	medpro-a2	255.255.255.0	192.168.20 .100			1
y	C-LAN	01A09	TN799 B	clan-a2	255.255.255.0	192.168.20 .100			2
y	MEDPRO	01B13	TN802 B	medpro-a3	255.255.255.0	192.168.10 .100			2
y	MEDPRO	01B09	TN802 B	medpro-b1	255.255.255.0	192.168.10 .100			2

n		255.255.255.0	.	.	.
> Enter values
	Field	Conditions/Comments
	Inter-region IP	Enter y to allow IP endpoints (phones and trunks) to use
	connectivity	MedPro resources administered in regions that are
	allowed?	different from the endpoints’ regions.
	Enable Eth Pt	The Ethernet port must be enabled (y) before it can be
		used. The port must be disabled (n) before changes can be
		made to its attributes on this screen.
	Type	Enter c-lan or medpro.
	Slot	Enter the slot location for the circuit pack.
	Code	Display only. This field is automatically populated with
		TN799 for C-LAN or TN802 for MedPro.
	Sfx	Display only. This field is automatically populated with B
		for the TN802 and TN799.
	Node name	Enter the unique node name for the IP interface. The node
		name entered here must already be administered on the
		Node Names screen
					1 of 2

		Administration for Network Connectivity
40	CID: 77730	555-233-504 — Issue 1 — April 2000