Lucent Technologies Release 8.2 manual 160 CID

Configuration 5A: R8csi <—ppp—> R8r (one C-LAN)			3 C-LAN Administration
<—ethernet—> R8si
	Field	Conditions/Comments
	COS:
		The values for these fields will be specified by the system
	COR:
		administrator.
	TN:
	Node Name:	The node name for the interface defined by this data module.
		This must be a name
	Establish	n means that the switch at the remote end of this connection
	Connection?	(Switch 1 in this case) will be responsible for the call setup.
		Enter y when administering the data module for Switch 1.
	Destination	Not needed if the “Establish Connection?” field is set to n
	Digits:
	Destination	Name of the node at the far end of this connection. This must be
	Node Name:	a name entered on the Node Names screen.
	CHAP?	This field enables/disables the Challenge Handshake
		Authentication Protocol security mechanism on this link. If you
		enter y, the system will prompt for a CHAP secret (password).
			2 of 2
	> Submit the screen
	End

		Administration for Network Connectivity
160	CID: 77730	555-233-504 — Issue 1 — April 2000