Lucent Technologies Release 8.2 manual 198 CID

Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)			3 C-LAN Administration
<—ethernet—> R8si
	Field	Conditions/Comments
	Subnet Mask	Enter the subnet mask associated with the IP address for
		this IP interface. (The IP address is associated with the
		node name on the Node Names screen).
		In this example, leave the default subnet mask,
		255.255.255.0, which indicates no subnetting for a Class
		C IP address.
		See the discussion of subnetting, Subnetting (page 16), in
		Chapter 1 and Configuration 1: R8r <—ppp—> R8si
		(page 60) in this chapter for details about subnet masks.
	Gateway Addr	Leave blank for this configuration. The only connection
		to this IP interface is node-1b on Switch 1, which is on
		the same subnetwork as this IP interface, so no gateway is
		needed.
		In general, for connectivity to other (sub)networks, enter
		the address of a network node that will serve as the
		default gateway to the other (sub)networks.
	Net Rgn	Enter the region number for this IP interface.
			2 of 2

		Administration for Network Connectivity
198	CID: 77730	555-233-504 — Issue 1 — April 2000