Omron FQM1-MMA21 Appendix C, Peripheral Port Settings for NT Link, Host Link Unit Number

System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations					Appendix C
Host Link Unit Number
Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+147	00 to 07	00 to 1F hex: Unit number 0	This setting determines the Coordinator	A412.15 (Peripheral	At next cycle (Also
		to 31	Module's unit number when it is con-	Port Settings Changing	can be changed
		Default: 00 hex	nected in a 1-to-N (N=2 to 32) Host	Flag)	with STUP (237).)
			Link.
Peripheral Port Settings for NT Link
Serial Communications Mode
Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+144	08 to 11	02 hex: NT Link	This setting determines whether the	A412.15 (Peripheral	At next cycle (Also
		Default: 0 hex	peripheral port will operate in NT Link	Port Settings Changing	can be changed
			mode or another serial communications	Flag)	with STUP (237).)
			mode. Set 02 for NT Link Mode.
			Note Communications will not be pos-
			sible with PTs set for 1:1 NT Links.
Baud Rate
Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+145	00 to 07	08 hex: Standard NT Link	Only the standard setting of 38,400 can	A412.15 (Peripheral	At next cycle (Also
		Default: 00 hex	be used for the NT Link Serial Commu-	Port Settings Changing	can be changed
			nications Mode.	Flag)	with STUP (237).)
Maximum Unit Number for NT Link (NT Link Max.)
Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+150	00 to 03	0 to 7 hex	This setting determines the highest unit	A412.15 (Peripheral	At next cycle (Also
		Default: 0 hex	number of PT that can be connected to	Port Settings Changing	can be changed
			the FQM1.	Flag)	with STUP (237).)

Peripheral Port Settings for Peripheral Bus (ToolBus)

Standard/Customer Setting

Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+144	15	0: Standard	The standard setting is for 9,600 baud.	A412.15 (Peripheral	At next cycle (Also
		1: Custom		Port Settings Changing	can be changed
		Default: 0		Flag)	with STUP (237).)

Serial Communications Mode

Address		Settings	Function	Related flags and	When setting is
				words	read
Word	Bits
+144	08 to 11	04 hex: Peripheral bus	This setting determines whether the	A412.15 (Peripheral	At next cycle (Also
		Default: 0 hex	peripheral port will operate in Periph-	Port Settings Changing	can be changed
			eral Bus Mode or another serial com-	Flag)	with STUP (237).)
			munications mode. Set 04 for
			Peripheral Bus Mode.
			Peripheral Bus Mode is used to com-
			municate with the CX-Programmer.

314