Omron FQM1-CM001, FQM1-MMA21, FQM1-MMP21 operation manual Appendix C, A620 to

System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations					Appendix C
Address	Bits	Name		Function		Controlled
						by
A620 to	00 to 15	Pulse Output 1 PV		Contains the pulse output PV as an 8-digit hexadecimal number.		Module
A621		Note This item applies when the		Relative mode: 00000000 to FFFFFFFF hex
		operation mode is relative pulse		Absolute linear mode: 80000000 to 7FFFFFFF hex
		output, absolute pulse output in		Absolute circular mode: 00000000 to circular maximum count
		linear mode, absolute pulse out-
		put in circular mode, or elec-
		tronic cam mode.
		One-shot Pulse Output 1 ON		Contains the time that the one-shot pulse output has been ON as
		Time		an 8-digit hexadecimal number.
		Note This item applies when the		0000 0000 to 0000 270F (unit: set by STIM(980))
		operation mode is one-shot out-
		put mode.
		Pulse Time Measurement 1		Contains the time measured by the pulse counter as an 8-digit
		Note This item applies when the		hexadecimal number.
		operation mode is time measure-		0000 0000 to FFFF FFFF hex (unit: set by STIM(980))
		ment mode using a pulse
		counter.
A622 to	00 to 15	Pulse Output 2 PV		Same as for Pulse Output 1 PV.
A623
		One-shot Pulse Output 2 ON		Same as for One-shot Pulse Output 1 ON time.
		Time
		Pulse Time Measurement 2		Same as for Pulse Time Measurement 1.
A624	00	Pulse Output 1	Pulse Output	OFF: Pulse output not completed (OFF during pulse output).
		Status	Completed	ON: Pulse output completed (ON when pulse distribution has been
			Flag	completed).
	01		Pulse Output	OFF: Pulse output amount not set by PULS(886).
			Set Flag	ON: Pulse output amount set by PULS(886).
	02		Target Fre-	OFF: Target speed has been reached during pulse output for
			quency Not	PLS2(887).
			Reached Flag	ON: Decelerated before reaching the target speed during pulse
				output for PLS2(887).
	03		Target Compar-	OFF: Comparison stopped.
			ison Flag	ON: Comparison in progress.
	04		Independent	OFF: Pulses not being output or being output continuously.
			Pulse Output	ON: Pulses being output.
			Flag
	05		PLS2 Position-	OFF: Not positioning.
			ing Flag	ON: Positioning in progress.
	06		Accelerating/	OFF: No output or constant-speed output.
			Decelerating	ON: Acceleration or deceleration in progress for ACC(888) or
			Flag	PLS2(887).
	07		Pulse Output	OFF: Pulse output stopped.
			Flag	ON: Pulse output in progress.
	08 to 15		Reserved	---
A625	00	Pulse Output 2	Pulse Output	Same as for Pulse Output 1 Status.
		Status	Completed
			Flag
	01		Pulse Output
			Set Flag
	02		Target Fre-
			quency Not
			Reached Flag
	03		Target Compar-
			ison Flag
	04		Independent
			Pulse Output
			Flag
	05		PLS2 Position-
			ing Flag
	06		Accelerating/
			Decelerating
			Flag
	07		Pulse Output
			Flag
	08 to 15		Reserved

334