Omron FQM1-MMP21 Basic Operating Procedure, Section, Save and Print the Programs, Data Tracing

Basic Operating Procedure Section 1-6

1,2,3... 1. Select the bit for differential monitoring.

2.Select Differential Monitor from the PLC Menu. The Differential Monitor Dialog Box will be displayed.

3.Select Rising or Falling.

4.Click the Start Button. The buzzer will sound when the specified change is detected and the count will be incremented.

5.Click the Stop Button. Differential monitoring will stop.

Time Chart Monitoring

The CX-Programmer’s time chart monitor operation can be used to check and debug program execution.

Data Tracing

The CX-Programmer’s data trace operation can be used to check and debug program execution.

9.Save and Print the Programs

Online Editing

When a few lines of the program in a Module have to be modified, they can be edited online with the FQM1 in MONITOR mode or PROGRAM mode from the CX-Programmer. When more extensive modifications are needed, upload the program from the Module to the CX-Programmer, make the necessary changes, and transfer the edited program back to the Module.

To save a program, select File and then Save (or Save As) from the CX-Pro- grammer menus.

To print a program, select File and then Print from the CX-Programmer menus.

10.Run the Programs Switch the FQM1 to RUN mode to run the programs.

18