Omron FQM1-CM001, FQM1-MMA21, FQM1-MMP21 operation manual Appendix C, A562

System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations					Appendix C
Address	Bits	Name		Function		Controlled
						by
A562	00	Analog Output 1	User Adjustment Com-	Initial value is 0.		Module
		Flags	pleted	Set to 1 if user performs offset/gain adjustment and
				Returns to factory default setting of 0 if adjustment
				value is cleared.
	01 to 03		Reserved	---
	04		Operating	ON: ON while the analog output is being changed by
				ACC(888).
				OFF: Turned OFF when target value is reached.
	05 to 07		Reserved	---
	08		Output SV Error	ON: ON when the output SV setting is outside of the
				allowed setting range.
				OFF: OFF when the output SV is within range.
				Note Only for END refresh.
	09 to 11		Reserved	---
	12		Factory Adjustment Value	ON: ON when the factory-set data stored in flash
			Error	memory is invalid.
				OFF: OFF when the factory-set data stored in flash
				memory is normal.
	13		Reserved	---
	14		User Adjustment Value	ON: ON when the user-set adjustment value stored
			Error	in flash memory is invalid.
				OFF: OFF when the user-set adjustment value
				stored in flash memory is normal.
	15		Reserved	---
A563	00	Analog Output 2	User Adjustment Com-	Same as for Analog Output 1 Flags.
		Flags	pleted
	01 to 03		Reserved
	04		Operating
	05 to 07		Reserved
	08		Output SV Error
	09 to 11		Reserved
	12		Factory Adjustment Value
			Error
	13		Reserved
	14		User Adjustment Value
			Error
	15		Reserved

337