Omron FQM1-MMA21 Related Areas and Settings, 7-9-4, Analog Input FunctionsSection, System Setup

Analog Input FunctionsSection 7-9

7-9-4	Related Areas and Settings
System Setup
Tab page		Function			Settings	Time when setting
						becomes effective
Analog Input/		Both inputs	Input	0 hex:	END refresh	At power ON and
Output		and outputs	method	1 hex:	Immediate refresh (Refresh with PRV(881).)	start of operation
			Output	0 hex:	END refresh	At power ON and
			method		(Content of A560 and A561 is output as	start of operation
					analog output after execution of END
					instruction.)
				1 hex:	Immediate refresh
					(Analog output when SPED(885) or
					ACC(888) is executed. A560 and A561
					used for monitoring.)
		Inputs	Input range	00 hex:	−10 to 10 V	At power ON
				01 hex:	0 to 10 V
				02 hex:	1 to 5 V (4 to 20 mA)
				03 hex:	0 to 5 V
		Outputs	Output	00 hex:	−10 to 10 V	At power ON
			range	01 hex:	0 to 10 V
				02 hex:	1 to 5 V
				03 hex:	0 to 5 V
				5A hex: Disable outputs (See note.)
				Note Outputs can be disabled to shorten the I/O
				refreshing time or reduce the Motion Control
				Module’s power consumption.
			Output stop	0 hex:	Clear outputs
			function	1 hex:	Hold outputs
				2 hex:	Maximum value
		Outputs	Output	These parameters have the same settings as output
			range	1, above.
			Output stop
			function

218